|
|
|
|
|
|
|
Erection of Fuel Storage Tank. (40 M Dia x 16M Ht. )Project :Taweelah New B Extension.,U.A.E Client :M/s. Siemens, Germany |
Fabrication
of Thiourea Storage Vessel (V-2218)
3.2
Mtr Dia x 5.38 Mtr Height) ASME SEC VIII Div 1,Design
Pressure:0.02 Mpa. Test Pressure: 0.28 Mpa
Project : Marmul Polymer
Flooding Project – PDO Oman -Client : SNF
Floerger, France
|
|
Makeup Water
Tank-MW- A & B - Design as per API 650
Project: Jebel Ali
Power & Desal. ‘L’ Station - Phase – I – DEWA, Dubai, U.A.E
For
M/s. Toshiba Corporation, Japan – Consultant : M/s. Lahmeyer
International
|
Erection of
Distillate Water Buffer Tank -Design
as per API 650
Project: Jebel Ali
Power & Desal. ‘L’ Station - Phase – I – DEWA, Dubai, U.A.E
For
M/s. Toshiba Corporation, Japan – Consultant : M/s. Lahmeyer
International
|
|
Fabrication of
Isoprapanol Vessel (V-2216)
Project : Marmul
Polymer Flooding Project – PDO Oman - Client : SNF
Floerger, France.
|
Ready for Dispatch
– Polymer Pressurize Pot
( 1.0 Mtr Dia x 2.1
Mtr Height) - ASME SEC VIII Div 1,Design
Pressure:0.05 Mpa. Test Pressure: 0.0751Mpa
Project : Marmul Polymer
Flooding Project – PDO Oman - Client : SNF
Floerger, France
|
|
Erection of
Roof of Roof Plates of
Diesel Fuel Oil Tanks – Work in progress
Jebel Ali Power &
Desal. ‘L’ Station - Phase – I - DEWA
For
M/s. Toshiba Corporation, Japan – Client : Mitsubishi
Corporation, Consultant : M/s. Lahmeyer International
|
Fabrication of
Buried Drain Vessel (2.5 Mtr
Dia X 7.4 Mtr Length)
Design as
per ASME
SEC. VIII – Div. 1 “U” Stamp. Design Pressure:0.35Mpa Test
Pressure:0.50Mpa
Project: Marmul
Polymer Flooding Project-PDO Oman - Client :Petroleum
Polymer Company LLC. Ruwi, Oman
|
 Supply & Fabrication of Liquid Sulphur Pump Tank Size - 12.5 m length X 2.850 m OD for Sulphur Forming Facilities - Tengizchevroil 2nd Generation Project. M/s Enersul Limited Partnership,Canada |
 Fabrication of Edible Oil Storage S S Tanks - Edible Oil Refinery Project - Al Ghurair Investment, U.A.E |
 Design,Fabrication,testing & painting of Diesel Fuel Oil Tanks - 4 Nos. 30.5M Dia x 14.2M Ht 8500 m3 (Work in progress)Jebel Ali Power&Desal.'L' Station-Phase-I-DEWA for M/s Toshiba Corporation,Japan |
 Design,supply,fabrication & primer painting of 5 Nos.blow down Tank ASME SEC VIII-Divn.1-"U" stamped-CMS Power Plant Al Shuweihat-Nooter Eriksen-CCT,Italy |
 Design,manufacture,testing,inspection and delivery of 8 Modules each containing 8 Nos. Gas Storage Bottles,each module weighing approx. 100 Tons. The overall size of the Module is 10.8 M long x 5.2 M width x 6.0 M height For "K" Power Station at Jebel Ali, U.A.E.-" |
|
|
©All
Right Reserved Petron Emirates Contracting Co.(L.L.C)
Site Designed and maintained by
JVIT.
|
